Outline · [ Standard ] · Linear+ Visteon 281159932R to MediaNav

Hello!, I have done custom wiring to change my Fiat Talento radio (same as Trafic III) to use a MediaNav instead of the 1 din VISTEON 281159932R. I've been looking for information and schematics for several days, including X82 schematics. It works good to turn on and listen on the speakers, but I'm having trouble finding the wiring schematic for the other 32-pin connector. I have a different wiring schematic as it says X82. I have attached a photo of the 32 pin connector from the van, where you can see that 18, 31 and 32 are not in use. It seems that the 6 pins of the control on the steering wheel match the wire color and the scheme, but only Volume Up works. I don't know what pin #8 is for. I have doubts about whether pin #17 and #18 correspond to Can HIGH and Can LOW. And I deduce that #27, #28 and #29 are for the built-in microphone, but I don't know the correspondece for MIC_SIG, MIC_GND and PWR_MIC. Is there anyone who can kindly tell me what the corresponding pin number on the MediaNav looks like for this atypical wiring? Thank you very much!. Best regards.

Attached thumbnail(s)
IMG_1294.JPG ( Size: 3.41mb ) Number of downloads: 81
IMG_1293.JPG ( Size: 3.95mb ) Number of downloads: 82

Hello!,

I have done custom wiring to change my Fiat Talento radio (same as Trafic III) to use a MediaNav instead of the 1 din VISTEON 281159932R.

I've been looking for information and schematics for several days, including X82 schematics. It works good to turn on and listen on the speakers, but I'm having trouble finding the wiring schematic for the other 32-pin connector. I have a different wiring schematic as it says X82.

I have attached a photo of the 32 pin connector from the van, where you can see that 18, 31 and 32 are not in use.

It seems that the 6 pins of the control on the steering wheel match the wire color and the scheme, but only Volume Up works.

I don't know what pin #8 is for.

I have doubts about whether pin #17 and #18 correspond to Can HIGH and Can LOW.

And I deduce that #27, #28 and #29 are for the built-in microphone, but I don't know the correspondece for MIC_SIG, MIC_GND and PWR_MIC.

Is there anyone who can kindly tell me what the corresponding pin number on the MediaNav looks like for this atypical wiring?

Thank you very much!.
Best regards.

Hi,
please find attached two wiring diagrams and one 32 pin connector for a Traffic III X82 radio (some units are same on Captur X87 also, but none is looking like your's).


Attached thumbnail(s)
Wiring1.png ( Size: 106.48k ) Number of downloads: 75
Wiring2.png ( Size: 151.26k ) Number of downloads: 74
32PinConnector.png ( Size: 193.07k ) Number of downloads: 70

Hi Gil26,

Thank you very much for the information.

Actually, I made the adapter following the specifications of the X82 schematic, but when I took out the radio and saw that the connector did not match that schematic, that was when I asked for help.

Yesterday I Found X87 too, attached; and it seems that doesn't correspond.

I don't want to be trying different combinations for fear of causing a blockage.

I will continue looking, that connection is very curious, perhaps it is something that varies as it is a Fiat Talento and not a Renault Trafic. I thought they were exactly the same.

In any case, I repeat, thank you very much!

Attached File(s)
 432258411_Esquema_Radio_Navegador_X87_Renault_Captur_.pdf ( 334.78k ) Number of downloads: 11